A PRACTICAL NOTE · Troubleshooting

How to apply this guide

Identify the microphone your recorder is actually using and compare it with the system default.

Start with

Write down the selected input under Sound and the input shown in your recorder. System Default follows macOS; an explicitly selected microphone can remain in use even after changing the system default.

Check before you finish

If the explicitly selected device goes away, pick a connected input before recording again. Test after waking or unplugging a dock if that is when the problem usually appears.

Evidence to keep: Record the expected sentence, actual result, microphone, language, model and app build before changing settings. This page’s key limit is: Identify the microphone your recorder is actually using and compare it with the system default.

Start here

With a display, headset and USB mic connected, app selection and system selection can diverge. The cleanest test identifies the receiving microphone before judging transcription quality.

Name both settings

Write down the selected input under Sound and the input shown in your recorder. System Default follows macOS; an explicitly selected microphone can remain in use even after changing the system default.

Make two short tests

Speak close to the intended microphone and record “table seven near the window.” Select the other device and repeat from the same position. Compare volume and whether the last phrase survives, rather than judging by a connection icon.

Check after disconnecting

If the explicitly selected device goes away, pick a connected input before recording again. Test after waking or unplugging a dock if that is when the problem usually appears.

Keep exploring