A PRACTICAL NOTE · Getting started

How to apply this guide

Prepare a VTT or SRT for the subscriber cut and verify which recording the transcript accompanies.

Start with

Open the subscriber version in Apple Podcasts Connect. Check the audio duration and replay the opening so you know which source the transcript needs to match.

Check before you finish

Upload through the subscriber episode’s transcript controls. Confirm that the matching episode shows the expected words and times to an authorized subscriber before announcing the transcript.

Evidence to keep: Confirm the app edition, permission and destination together; an allowed permission alone does not prove that insertion will work. This page’s key limit is: Prepare a VTT or SRT for the subscriber cut and verify which recording the transcript accompanies.

Start here

A subscriber episode can have a different introduction, ending or advertisement break from its public counterpart. A transcript timed for one cut can drift when attached to the other.

Confirm the specific episode

Open the subscriber version in Apple Podcasts Connect. Check the audio duration and replay the opening so you know which source the transcript needs to match.

Prepare the timed file

Export the approved transcript in a supported format such as VTT or SRT. Verify the language and sample a cue after the first point where the subscriber version differs from the public one.

Check playback with authorized access

Upload through the subscriber episode’s transcript controls. Confirm that the matching episode shows the expected words and times to an authorized subscriber before announcing the transcript.

Keep exploring